A Direct-Vent system uses two vent pipes. One draws air in from outdoors to support combustion. The other exhausts the by-products of combustion to the outside. The two vent pipes may be concentric (exhaust pipe within a larger diameter intake pipe) or co-linear (separate pipes of about the same size).
Combustion takes place inside a sealed chamber – with a glass front in the case of a fireplace. Room air circulates around the combustion chamber, often assisted by a blower, to heat the room.
A DV system is often installed along an outside wall to simplify the vent run, but can also be installed elsewhere in the home and vented through the roof.
Innsbrook Direct-Vent Insert
A Direct-Vent Fireplace Insert turns your existing wood-burning fireplace into an efficient gas-fired heat source. Direct-Vent Fireplace Inserts are classified as zone heating appliances. Zone heating is inherently more efficient than your existing wood-burning fireplace or your central furnace.
Innsbrook Direct-Vent Inserts (DVC)
Our Innsbrook Direct-Vent inserts feature optional liners and hand-painted ceramic fiber logs, nestled atop the variable flame height burner, to create an exceptionally attractive traditional fireplace. With inputs of 20,500 Btu, 26,000 Btu, and 28,500 Btu, the Direct-Vent insert’s unique Slope Glaze Burner produces natural flickering flames that dance and delight – warming your heart as it warms your soles.
What’s Included
- Innsbrook Clean Face Fireplace Insert
- Blower
- Log Set
- Ceramic Glass
- Barrier Screen
Not Included (Sold Separately)
- Surround (Required)
- Decorative Liners
- Control Options
- Bottom Covers
- Decorative Fronts
- Gas Conversion Kit
- Cast Iron Surround
- Adaptor for Cast Iron Surround
- Custom Surround & Shroud
Features
- Good efficiency – 60 to 80%
- May be used as primary heat source
- Separates room air from combustion air
- Can operate with a remote or thermostat
- Most systems can provide life-saving heat during a winter power outage
- Good heat output with thermal transfer through the glass and air circulation
- We offer our traditional Innsbrook Direct-Vent Inserts in three sizes – small, medium, and large – to fit most wood-burning fireplaces
- Choose Millivolt ignition with standing pilot to provide heat, even in the absence of electric power, or Intermittent Pilot, which saves even more energy
- IP systems can operate with a standing or intermittent pilot during power outages
- Innsbrook Direct-Vent inserts feature optional liners and hand-painted ceramic fiber logs, nestled atop the variable flame height burner, to create an exceptionally attractive traditional fireplace
- Direct-Vent insert’s unique Slope Glaze Burner produces natural flickering flames that dance and delight – warming your heart as it warms your soles
Specifications
| Model | DVC28IN |
| Max BTU (w/both burners) | 28,500 |
| Min BTU (w/both burners) | 18,500 |
| Vent Type | Direct Vent |
| Ignition Type | Intermittent Pilot Control |
| Type of Gas | Natural Gas |
| Venting | 3-Inch Flex |
| Installation | Insert |
| KWH (Maximum) | 8.27 |
| KWH (Minimum) | 5.36 |
| Orifice | 2.60mm |
| Air Shutter Opening | 3/16 inch open |
| Gas Inlet Shutoff Valve (pipe) | 1/2″ NPT |
| Gas Supply Pressure (Inches Water Column) |
| Maximum | 14 |
| Minimum | 4.5 |
| Manifold | 3.5 |
Dimensions
| Ceramic Glass Width | 31″ |
| Ceramic Glass Height | 16″ |
| Framing Width | 34″ |
| Framing Height | 23″ |
| Framing Depth | 17″ |


Reviews
There are no reviews yet.