0
Your Cart
0
Your Cart

A Direct-Vent system uses two vent pipes. One draws air in from outdoors to support combustion. The other exhausts the by-products of combustion to the outside. The two vent pipes may be concentric (exhaust pipe within a larger diameter intake pipe) or co-linear (separate pipes of about the same size).

Combustion takes place inside a sealed chamber – with a glass front in the case of a fireplace. Room air circulates around the combustion chamber, often assisted by a blower, to heat the room.

A DV system is often installed along an outside wall to simplify the vent run, but can also be installed elsewhere in the home and vented through the roof.

Innsbrook Direct-Vent Insert

A Direct-Vent Fireplace Insert turns your existing wood-burning fireplace into an efficient gas-fired heat source.  Direct-Vent Fireplace Inserts are classified as zone heating appliances. Zone heating is inherently more efficient than your existing wood-burning fireplace or your central furnace.

Innsbrook Direct-Vent Inserts (DVC)

Our Innsbrook Direct-Vent inserts feature optional liners and hand-painted ceramic fiber logs, nestled atop the variable flame height burner, to create an exceptionally attractive traditional fireplace. With inputs of 20,500 Btu, 26,000 Btu, and 28,500 Btu, the Direct-Vent insert’s unique Slope Glaze Burner produces natural flickering flames that dance and delight – warming your heart as it warms your soles.

What’s Included

  • Innsbrook Clean Face Fireplace Insert
  • Blower
  • Log Set
  • Ceramic Glass
  • Barrier Screen

Not Included (Sold Separately)

  • Surround (Required)
  • Decorative Liners
  • Control Options
  • Bottom Covers
  • Decorative Fronts
  • Gas Conversion Kit
  • Cast Iron Surround
  • Adaptor for Cast Iron Surround
  • Custom Surround & Shroud

Features

  • Good efficiency – 60 to 80%
  • May be used as primary heat source
  • Separates room air from combustion air
  • Can operate with a remote or thermostat
  • Most systems can provide life-saving heat during a winter power outage
  • Good heat output with thermal transfer through the glass and air circulation
  • We offer our traditional Innsbrook Direct-Vent Inserts in three sizes – small, medium, and large – to fit most wood-burning fireplaces
  • Choose Millivolt ignition with standing pilot to provide heat, even in the absence of electric power, or Intermittent Pilot, which saves even more energy
  • IP systems can operate with a standing or intermittent pilot during power outages
  • Innsbrook Direct-Vent inserts feature optional liners and hand-painted ceramic fiber logs, nestled atop the variable flame height burner, to create an exceptionally attractive traditional fireplace
  • Direct-Vent insert’s unique Slope Glaze Burner produces natural flickering flames that dance and delight – warming your heart as it warms your soles

Specifications

Model DVC26IN
Max BTU (w/both burners) 26,000
Min BTU (w/both burners) 20,000
Vent Type Direct Vent
Ignition Type Intermittent Pilot Control
Type of Gas Propane
Venting 3-Inch Flex
Installation Insert
KWH (Maximum) 7.54
KWH (Minimum) 5.8
Orifice #53
Air Shutter Opening 1/2 inch open
Gas Inlet Shutoff Valve (pipe) 1/2″ NPT
Gas Supply Pressure (Inches Water Column)
Maximum 14
Minimum 11
Manifold 10

Dimensions

Ceramic Glass Width 28″
Ceramic Glass Height 14″
Framing Width 31″
Framing Height 21″
Framing Depth 17″

Reviews

There are no reviews yet.

Be the first to review “Empire Innsbrook 31″ Medium Direct Vent Clean Face Intermittent Pilot Control, Propane Gas Traditional Fireplace Insert”

Your email address will not be published. Required fields are marked *